Lightning protection

A Lightning Protection System (LPS) is designed to protect a structure or building and contents from damage caused by the intensely high voltage currents of a lightning strike (often exceeding a 1,000,000,000 Volt Amps). Lightning protection systems act like a Faraday Cage for buildings. Protecting the building and its contents from external electric fields by migrating that energy around the cage instead of through its contents. A lightning protection system offers a lightning strike a low resistance path to ground where the enormous energy is then safely dispersed. A typical lightning protection system includes lightning rods, metal conductors and ground electrodes designed to offer a low resistance path to ground and to take any high voltage currents from a lightning strike away from the structure of the building.

The low resistant path offered by a lightning protection system is very important as high voltage currents from a lightning strike will always take a path of least resistance to ground.

Sidebar
Grid View:
Quickview

100440 Strip, St/tZn, 40x4.0 mm 1coil = ca. 50 kg ~ 40m

150.00лв. /pcs

Description:Strip according to DIN EN 62561-2 for use in lightning protection systems or earth termination systems. Material:St/tZn, Z 500Width:40 mmThickness:4.0 mmCross section:160 mm²Short-circuit current (50 Hz), 1 s, ≤ 300 °C:11.2 kA1 m = ca. 1,28 kgPacking unit:1 coil = ca. 50 kg..

Quickview

103101 Concrete base, 16 kg, Ø 380 mm

34.80лв.

Описание:Бетонна основа с втулка с резба от неръждаема стомана за мълниеприемници ф16 пружини за  защита на покривни конструкции върху плоски покриви. Материал: устойчив на замръзване бетон (C45 / 55)Диаметър: Ø 380 ммТегло: 16 кгВтулка с резба: неръждаема стомана V2A, вътрешна резба M16..

Quickview

103112 Optimal air-termination rod, Alu Ø 16/10 mm, 2.0 m, with thread M16

26.40лв.

Description:Optimal air-termination rod according to DIN EN 62561-2 for the protection of roof structures.Type suitable for concrete bases 16 kg with thread insert. Material:aluminium AlMgSi 0.5Total Length:2000 mmDiameter:16/10 mm (Ø 10 mm, 1000 mm length)Thread:M16..

Quickview

103113 Optimal air-termination rod, Alu Ø 16/10 mm, 2.5 m, with thread M16

30.12лв.

Description:Optimal air-termination rod according to DIN EN 62561-2 for the protection of roof structures.Type suitable for concrete bases 16 kg with thread insert. Material:aluminium AlMgSi 0.5Total Length:2500 mmDiameter:16/10 mm (Ø 10 mm, 1000 mm length)Thread:M16A lightning rod  is a metal rod mounted on a structur..

Quickview

103114 Optimal air-termination rod, Alu Ø 16/10 mm, 3m, with thread M16

35.40лв.

Description:Optimal air-termination rod according to DIN EN 62561-2 for the protection of roof structures.Type suitable for concrete bases 16 kg with thread insert. Material:aluminium AlMgSi 0.5Total Length:3000 mmDiameter:16/10 mm (Ø 10 mm, 1000 mm length)Thread:M16A lightning rod  is a metal rod mounted on a structur..

Quickview

103117 Optimal air-termination rod, Alu Ø 16/10 mm, 4m, with thread M16

65.40лв.

Description:Optimal air-termination rod according to DIN EN 62561-2 for the protection of roof structures.Type suitable for concrete bases 16 kg with thread insert. Material:aluminium AlMgSi 0.5Total Length:4000 mmDiameter:16/10 mm (Ø 10 mm, 1000 mm length)Thread:M16A lightning rod  is a metal rod mounted on a structur..

Quickview

1044 Inspection door, St/tZn, embossed

28.80лв.

Description:Inspection door to be used for flush-mounted test joints.Type with lug suitable for mounting to rendering or masonry. Material:St/tZn Steel, hot galvanized, stampedMounting dimensions:155x205 mmDimensions:180x230 mm..

Quickview

110171 Conductor fastener, ZP-St/tZn, Ø 8-10 mm with washer, screw and dowel

6.24лв.

Description:Conductor fastener according to DIN EN 62561-4 for fixing round conductors to walls.Type with washer, screw and dowel. Material of base:zinc die casting ZP 5Material of fastener:St/tZnHeight of conductor leading:24 mmFit of conductor fastener:Ø 8-10 mmFit of dowel:Ø 8 mm..

Quickview

111003 Niro-Clip conductor fastener, V2A/PA 6 Ø 8 mm, PA6-base grey, with Ø 7 mm bore

1.92лв.

Описание:Niro-Clip закрепващ проводник съгласно DIN EN 62561-4 за закрепване на кръгли проводници към стени. Материал на скобата: неръждаема стомана V2AМатериал на основата: PA 6 сивВисочина на водещия проводник: 18 mmПриспособление за закрепване на проводника: Ø 8 mmФиксиране на закрепващия проводник: Ø 7 mm..

Quickview

111043 Roof conductor holder, Alu-V2A, Ø 8 mm type A, 120mm length, interlocking tiles

5.58лв.

Description:Roof conductor holder according to DIN EN 62561-4 for easy fitting to interlocking tiles.Type with additional reinforced trapezoidal section made of stainless steel and Niro-Clip conductor fastener. Material of bottom part:aluminiumLength:120 mmMaterial of trapezoidal section:stainless steel V2AMaterial of conductor fastener:stain..

Quickview

111192 Roof conductor holder, V2A, Ø 8mm type A ridge tiles, centrical conductor leading

11.76лв.

Description:Roof conductor holder according to DIN EN 62561-4 for installing round conductors to ridge tiles.Type with Niro-Clip conductor fastener and tension springs. Material:stainless steel V2AHeight of conductor leading:39 mmFit of conductor fastener:Ø 8 mmConductor leading:fixed, type A, centrical to the roof ridge..

Quickview

111630 Roof conductor holder , Ø 8 mm

4.14лв.

Roof conductor holder PR-ÖKO 2, Ø 8 mm with concrete base, for flat roofs.Description:Roof conductor holder according to DIN EN 62561-4 for installing round conductors to flat roofs.Type with plastic base plate and double conductor fastener, frost-resistant and weatherproof, parts can be recycled separately. Dimensions (length x width x thickn..

Quickview

1270 Multi-clamp, St/tZn, Ø 8-10 mm with carriage bolt M10 and nut

3.54лв.

Description:Original-Multi-clamp according to DIN EN 62561-1 for the universal use as T-, cross-, parallel-clamp and joint-connector. Material of clamp:St/tZnFit:Ø 8-10 mmScrew:Carriage bolt M10 with nut, St/tZn Connecting varieties of the Multi-clamp: T-connectionCross-connectionParallel-connectionend to end-connectionStem clam..

Quickview

1305 Gutter terminal-clamp DUO, Alu Ø 8 mm, for bead thickness Ø 15-20 mm

7.02лв.

Description:Gutter terminal-clamp DUO according to DIN EN 62561-1 for the connection of air-termination conductor or down conductor to the gutter. Material of clamp:aluminiumFit:Ø 8 mmBead thicknesses:Ø 15-20 mmScrew:Carriage bolt M10 with nut, St/tZnSpring lock washer:stainless steel V2A..

Quickview

Disconnecting clamp, Alu Ø 8-10 mm / Ø 16 mm

6.72лв.

Description:Disconnecting clamp according to DIN EN 62561-1 to be used for connecting the down conductor to the earth entry. Material:aluminiumFit:Ø 8-10 mm/Ø 16 mmScrews:[2x] hexagon bolt M8, stainless steel V2A..

Showing 1 to 15 of 23 (2 Pages)

Our Latest Blogs

20 / February

Избор на сечение на проводник..

February 20th, 2020
20 Feb
0 Comment
20 / February

How to choose the Right Electrician ?

February 20th, 2020
20 Feb
0 Comment
25 / May

Home electrical installation

May 25th, 2019
25 May
0 Comment
Back to top